Imagine the Universe!
Imagine Home | Science | Advanced Science | 

Physics of X-ray Imaging

The design of an X-ray imaging system is difficult because of the constraints imposed by the interaction of X-rays with matter. First, X-rays impinging at normal incidence on any material are largely absorbed rather than reflected. (It is this property that makes possible medical X-rays. X-rays are absorbed by dense tissue like bone, and transmitted through less dense tissue like skin and muscle. Thus, a medical X-ray shows the "shadow" of the bone.) Normal incidence mirrors, like those used for optical telescopes, are ruled out. Second, the index of refraction, n, is ~1 at X-ray wavelengths for all materials. Any refracting system (i.e., lens) sufficiently thin to transmit X-rays must therefore possess a long focal length; such a system would be highly impractical for use on a rocket or satellite.

For most materials, however, the index of refraction is slightly less than unity at X-ray wavelengths. This property offers the possibility of using "total external reflection" of X-rays incident on a surface near grazing incidence. The index of refraction at X-ray wavelengths may be written:

n = 1 - d - ib

where d and b depend on the material and the wavelength of the incident X-rays. If d > 0 and b ~ 0, and the incident X-rays are propagating in a vacuum (for which n = 1), then by Snell's law X-rays will undergo total external reflection for angles theta < thetac, where cos(thetac) = 1 - d. Thus thetac ~ (2d)1/2. The visible light analogy to this phenomenon is the "total internal reflection" which, among other things produces the glistening of a diamond. In that case, the index of refraction of the diamond is higher than air, so light within the diamond reflects efficiently off the various facets.

Generally, the dependence of d, and thus thetac of a material is proportional to its atomic number, Z. Thus high Z materials reflect X-rays more efficiently than low Z materials. The most commonly used reflecting materials are gold and nickel, for which the critical angle at 1 keV is about 1 degree.

Contributed by Rob Petre of the Laboratory for High-Energy Astrophysics, GSFC

If words seem to be missing from the articles, please read this.

Imagine the Universe! is a service of the High Energy Astrophysics Science Archive Research Center (HEASARC), Dr. Alan Smale (Director), within the Astrophysics Science Division (ASD) at NASA's Goddard Space Flight Center.

The Imagine Team
Project Leader: Dr. Barbara Mattson
Curator: Meredith Gibb
Responsible NASA Official: Phil Newman
All material on this site has been created and updated between 1997-2014.
This page last updated: Monday, 27-Sep-2004 11:26:10 EDT